How To Reset Rogers Ignite Modem

Are you wondering how to reset your Rogers Ignite modem?

Resetting your modem can be a simple yet effective solution to resolve connectivity issues, improve performance, and ensure a stable internet connection.

In this guide, we will walk you through the step-by-step process of resetting your Rogers Ignite modem.

how to reset rogers ignite modem?

To reset rogers ignite modem: Restart via app: Open Ignite HomeConnect, log in, navigate to WiFi > View WiFi equipment, select modem, tap Restart > Restart Gateway. Reset XB6: Press Reset button until green light. Reset XB7/XB8: Hold WPS button for 30 seconds until light flashes green. Admin reset: Go to https://10.0.0.1, log in, Troubleshooting > Reset/Restore Gateway, select reset.

Down below, we have discussed the solution in step-by-step detail.

Restarting the Ignite WiFi Gateway Modem Using the Ignite HomeConnect App

Open the Ignite HomeConnect app on your device.
Log in with your MyRogers credentials.
Navigate to ‘WiFi’ and then ‘View WiFi equipment’.
Select your Gateway modem from the list.
Tap ‘Restart’ followed by ‘Restart Gateway’.

Resetting the Modem Using the Physical Reset Button

For the XB6 model:

Find the Reset button located beneath the coaxial cable connection on the modem.
Use a pointed object to hold down the Reset button until the modem’s light turns green.

Also Read: How To Activate Q Link Wireless SIM Card

For the XB7 and XB8 models:

The WPS button doubles as a Reset button, located above the telephone ports.
Press and hold this button for at least 30 seconds.
Release it when the top light flashes green quickly, signaling the reset process has begun.

Resetting the Modem Using the Admin Page

Connect to your WiFi network and open a browser.
Enter https://10.0.0.1 into the address bar.
You might see a security warning. Proceed by selecting the option to continue (the process varies by browser).
Log in with the username ‘Admin‘ and your personalized password (default is ‘password‘).
Go to ‘Troubleshooting‘.
Choose ‘Reset/Restore Gateway‘.
Select the reset option you require, from a simple restart to a full factory reset.