How to Fix PlayStation VR2 (PSVR2) Fan Not Working

Is the PlayStation VR2 fan not working, more fog forming while playing the game?

The PSVR2’s internal fan plays a crucial role in maintaining a comfortable experience by preventing the headset from overheating and keeping the lenses clear from fog.

If this fan fails to operate, it can lead to discomfort and interrupt the seamless integration between you and your virtual environment.

In this guide, we’ll explore the steps you can take to troubleshoot and potentially resolve issues with a non-functioning PSVR2 fan.

Why PlayStation VR2 (PSVR2) Fan Not Working

If the fan in your PlayStation VR2 (PSVR2) isn’t working, there could be several reasons behind this issue:

  1. Software Glitches: Temporary software bugs or glitches could cause the fan to stop functioning properly.
  2. Power Supply Issues: If the PSVR2 headset isn’t receiving enough power, the fan may not operate.
  3. Obstructed or Dirty Fan: Dust and debris can accumulate over time and obstruct the fan’s movement or clog the air vents, preventing proper airflow.
  4. Mechanical Failure: The fan motor could be defective or worn out, especially if the headset has been used extensively or handled roughly.
  5. Overheating: If the headset overheats, it might shut down certain functions, including the fan, to prevent damage.
  6. Firmware Issues: Outdated firmware can sometimes lead to hardware not functioning as intended. Ensuring your PSVR2 and PS5 are up to date is crucial.

How to Fix PlayStation VR2 (PSVR2) Fan Not Working

Try to inspect the hardware, ensuring proper ventilation, check for software updates, and if necessary, contacting Sony support for further assistance or arranging for repairs.

Also Read:  How To Fix Red Dot Appearing In Apple Vision Pro

It is not recommended to attempt to repair the fan yourself, as this could void the warranty or cause further damage.

Here are some steps you can take to try and fix the issue:

1. Low Battery

First, make sure your Heads set is fully charged. A low battery may lead to an issue sometimes. During the charging process, the status indicator on your controller will “blink white” slowly. Once the charge is full, the status indicator will switch off,” along with the controller itself.

2. Inspect the VR Headset

When inspecting the headset for any visible signs of damage or blockage. Check for any dust or dirt in the path the air travels. It draws in cool air around the user through the “gap between the headset and the head strap.

3. Listen for the Fan

Put on the headset and start any VR game or application. Listen closely to hear if the fan is working at a low speed. If there’s no sound at all, the fan might be malfunctioning.

4. Ensure Proper Ventilation

Use the PSVR2 in a well-ventilated area to prevent the device from overheating. If the headset is too hot, give it time to cool down before attempting to use it again.

Also Read:  How To Reset Meta Quest 3 Without Losing Games

5. Power Cycle the PS5 and PSVR2

Power cycling the PSVR2 will resolve temporary glitches causing the fan to malfunction.


  • Press and hold the power button on the front of the PS5 until the system beeps twice, indicating it is completely off.
  • Unplug the power cable from the back of the console, wait for at least 10 seconds, and plug the power cable back into the PS5.
  • Press the power button to turn your PS5 back on. The system should boot up as normal.


  • Turn off the PSVR2 headset by pressing the power button at the bottom of the headset.
  • Unplug the voice and USB cable from the PS4 Console. Wait for a couple of minutes, then reconnect it and turn on the headset.

6. Reset The VR2 Headset

Some electronic devices can be reset to fix internal errors. While there’s no specific reset button for the PSVR2 headset fan, resetting the associated PSVR2 controllers or the entire PS5 system might help indirectly resolve the issue.

  1. Power off your PS5 console.
  2. Locate the small reset button on the back of the controller near the L2 shoulder button.
  3. Use a small tool (like a paperclip) to press and hold the reset button for about 5 seconds.
  4. Release the reset button.
  5. Connect the controller to the PS5 with a USB cable and press the PS button to pair it again.

7. Update PSVR2 System Soft

Updating system software will fix any issues related to hardware communication issues due to corrupted files and bugs in the software.

Also Read:  How To Fix PlayStation VR2 (PSVR2) Headset Flickering

To update the system software on your PS5:

  1. From the PS5 home screen, go to the “Settings” icon in the top right corner.
  2. Scroll down and select “System”.
  3. Choose “System Software Update and Settings”.
  4. Select “Update System Software” and then “Update Using Internet”.
  5. If an update is available, download and install it following the prompts.
  6. Wait for the update to complete without turning off your PS5.
  7. Confirm the update by checking the ‘‘System Software Update and Settings’‘ menu.

8. Contact Sony Support

If none of the above steps work, the problem may be more technical and require professional repair. Contact Sony’s customer support for assistance. They can guide you through additional troubleshooting steps or advise you on how to get the headset serviced.