How To Fix Oculus Quest 2 Controller Not Working After Battery Replacement

Have you recently replaced the batteries in your Oculus Quest 2 controller only to find that it’s not working properly?

If you’ve replaced the batteries in your Oculus Quest 2 controllers and find that they’re not working, it can be a frustrating experience.

In this article, we’ll help you troubleshoot and fix the problem of your Oculus Quest 2 controller not working after a battery replacement

How to Fix Oculus Quest 2 controller not working after battery replacement?

Down below, we have discussed the solution in step-by-step detail.

1. Check the Battery Compartment

First, ensure that the battery compartments and terminals are clean and free of any dust, dirt, or damage.

Dirt and debris can prevent proper contact between the batteries and the terminals, which can lead to power issues.

2. Ensure Proper Battery Orientation

It might seem obvious, but it’s always worth double-checking that the batteries are inserted correctly with the positive and negative ends matching the controller’s battery compartment indications.

3. Perform a Hard Reset

Sometimes, a hard reset on the controllers can resolve the issue.

Also Read:  How To Change The Meta Business Suite Password

To do this, remove the batteries from the controller for at least 30 seconds before reinserting them. This can help reset the controller’s internal hardware.

Steps to perform a hard reset on the Oculus Quest 2 controller after battery replacement:

  • Power off the Quest 2 headset.
  • Press and hold the power button for 10-15 seconds until “Restart” option appears.
  • Release the power button when you see “Restart“.
  • Use the volume buttons to select “Restart“.
  • Wait for the headset to finish rebooting fully.
  • Repair the controller through the Devices menu or Oculus app. Test the controller functions once paired again.

4. Use the Correct Batteries

Make sure you’re using the right type of batteries. The Oculus Quest 2 controllers are designed to work with AA batteries.

If you’re using rechargeable batteries, ensure they are fully charged before use.

5. Check for Firmware Updates

Ensure that your Oculus Quest 2 headset is up to date with the latest firmware. Sometimes, updates can include fixes for controller issues.

Steps for Updating Oculus Quest Headset Software:

  • Put on your headset, and from the universal menu, select “Settings.”
  • Navigate to the “About” section to see if there are any updates available.
  • If an update is available, you should see the option to “Download” or “Update.”
Also Read:  How To Fix Oculus Quest 2 Won't Turn On Issue

6. Re-Pair the Controller

If the controller is still not working, try re-pairing it with your Oculus Quest 2 headset.

In the Oculus app, you should find an option to pair a new controller; follow the on-screen instructions to attempt re-pairing.

Here are the steps to re-pair the Oculus Quest 2 controller:

  • Turn on the Oculus Quest 2 headset.
  • Go to Settings > Devices > Controllers > Pair New Controller.
  • Select the left or right controller to pair it.
  • Follow the instructions for the specific controller.

7. Contact Meta Support

If none of the above solutions work, it might be a hardware issue. In this case, reaching out to Meta Community Forums or Oculus Support for further assistance would be the next step.