How To Program Your Cablevision Optimum Remote To Your Television

Are you tired of juggling multiple remotes for your home entertainment system?

Simplify your life by programming your Cablevision Optimum remote to control your television.

In this article, we’ll take you through the straightforward steps to program your Optimum remote to your TV. 

How to Program Your Cablevision Optimum Remote to Your Television?

Step 1: Insert Fresh Batteries into Your Remote

Before starting the programming process, ensure that your Cablevision remote is powered by two fully charged AA alkaline batteries. This will prevent the remote from switching off during programming.

Step 2: Power On Your Television

Switch on your TV. The current channel does not impact the programming process, so you don’t need to worry about what’s on the screen.

Step 3: Locate the Remote Programming Code

Refer to the provided table to find the programming code specific to your TV model. Jot down the three-digit code as you will need it shortly for programming your remote.

Step 4: Enter Programming Mode

To initiate programming mode, press and hold the ‘TV‘ button and the ‘SEL‘ (Select) button on your remote for 3 seconds. The ‘iO‘ button will illuminate in red, signaling that the remote is ready to be paired.

Also Read:  How To Fix The VOXI Data Not Working

Step 5: Enter Your Code

Pointing the remote at your TV, enter the three-digit code you noted earlier. If the code is correct, your TV will turn off, indicating that the remote has accepted the code.

Step 6: Mute Test

With the remote still aimed at your TV, press the ‘Mute‘ button. If the programming was successful, your TV should turn back on.

Step 7: Save the Code

Press the ‘TV‘ button once more to save the programming code to the remote’s memory. The ‘iO‘ button will blink twice, confirming the code has been saved.