If you’re experiencing the “Oculus TV storage keeps stopping” error, it can be a real hindrance when trying to enjoy your favorite content on your VR device.
This issue often points to storage or cache-related problems within the app.
The error message usually reads: “TV Storage keeps stopping”
In this guide will walk you through the troubleshooting process to get your Oculus TV running without interruptions.
How to Fix Oculus TV storage keeps stopping?
If you are facing the storage stopping issue on the Oculus TV then you should try clearing the Oculus TV app storage, ensure that the software is up to date, and try resetting the Guardian system.
Down below, we have discussed the solution in step-by-step detail.
1. Perform a Clean Reboot
Sometimes, a clean reboot of your device can fix the problem.
This means turning off your device completely and then turning it back on, which can clear out any temporary glitches that may be causing the app to stop.
Here are some to follow to perform a clean reboot:
- Turn off your Oculus device completely.
- Wait for 30 seconds to 1 minute.
- Turn the device back on and check if the issue with Oculus TV persists.
2. Clear Oculus TV App Storage
Clearing the Oculus TV app storage resolves issues by deleting saved data that may be corrupt or causing the app to crash.
It effectively resets the app to a default state, which can eliminate bugs or glitches that have developed over time.
To clear the Oculus TV app storage on your Oculus device, follow these steps:
- Open the Oculus menu and select Settings.
- Go to Apps, then find and select Oculus TV.
- Choose Storage, then select Clear Data or Clear Storage.
3. Update the Oculus Software
Outdated software can often lead to performance issues. Make sure your Oculus device is running the latest software version.
After the updates, check if the issue of the storage stopping has been resolved or not.
here are the steps to update the Oculus software:
- Put on your Oculus headset and press the Oculus button on your controller to open the universal menu.
- Select Settings and then See All.
- Look for the About section to check for software updates.
- If an update is available, select Update to install the latest version.
5. Reset Guardian
Resetting the Guardian system can help resolve issues by recalibrating the virtual boundaries that keep you safe while using your Oculus device.
This process clears any glitches or errors that may have occurred with the Guardian’s operation.
Here are the steps to reset the Guardian system:
- Turn on your Oculus Quest 2 headset.
- From the home screen, select the “Settings” option.
- In the left-hand menu, select “Device“.
- Scroll down and select “Guardian“.
- Choose “Clear Guardian History“.
- A pop-up message will appear asking if you want to continue. Select “Clear Guardian History” again to confirm.
- Follow the on-screen instructions to set up a new guardian system.
6. Factory Reset Oculus
If the above steps do not resolve the issue, a more drastic measure is to perform a factory reset.
This will erase all data from your device and return it to its original settings, so use this as a last resort.
To perform a factory reset on your Oculus Quest, follow these steps:
- Power off the headset by pressing and holding the power button for 10 seconds.
- Enter the boot screen by holding the power and volume (-) buttons together until the boot screen appears.
- Use the volume buttons to select Factory Reset and confirm with the power button.
- Select Yes to confirm and start the factory reset process.
7. Contact Oculus Support
If you’ve tried all the above solutions and Oculus TV keeps stopping, it might be time to contact Oculus support for further assistance.
They can provide more in-depth troubleshooting or potentially identify if there is a more significant issue with your device.